Table of Contents
Advertisement
0.6 Voice message recording
Voice message recording
This is the recording centre for user names, zone names, partition names, output
names, room names and system names. The voice message-recording menu
also offers an alternant location for the recording of entry and exit messages
(previously described under menu 5 – Message bank).
Once recorded, a system name will be announced every time a new dial in
session is established with the NX-595E. This is ideal when monitoring multiple
sites.
Apart from voice recordings, zones, partitions, outputs and rooms can be
configured using pre-recorded words from the word library. You may string up to
eight words together to achieve your desired description.
Note:
Please note that voice recording is limited to the first 64 zones, pre-
recorded library words must be used for all additional zones above zone 64.
Exit Message Recording
How to: Record an Exit message
Step
Example
To record a new exit message, from the Voice message recording menu
1.
[PIN] Call the NX-595E via an offsite touch-tone phone to begin the session.
Press [0] for system configuration menu.
2.
Press [6] for voice message recording.
Press [1] to record an exit message.
3.
Press #, to record a new exit message.
4.
Record 10 second exit message after the beep.
st
1
nd
2
5.
rd
3
# Disconnects session.
NX-595E User Manual
0.6.1 To record an exit message
0.6.2 To record an entry message
0.6.3 To record a user name
0.6.4 To record or configure a zone name
0.6.5 To record or configure an partition name
0.6.6 To record or configure an output name
0.6.7 To record or configure a room name
0.6.8 To record a system name
star, moves back to voice message recording menu.
star, moves back to system configuration menu.
star, moves back to main menu.
37
Advertisement
Table of Contents
