Remote Control Panel Procedures
Numeric Input Screen
Numeric Input Screen
6
DP5000 Series Remote Control Panel
In a numeric input screen the current printer setting is displayed above
the reverse video input field. The maximum allowable value is displayed
in the lower right hand corner of the screen. The minimum allowable value
is displayed above the maximum allowable value.
•
Use the left and right arrows to move within the input field.
•
Use the down arrow key to delete the current character.
•
Use the numeric keys to enter a new value.
•
Press
(
ENTER
•
Press
ESCAPE
the value setting to the printer.
Note: If an invalid setting is sent to the printer, the selection will flash and the
previous screen will not appear.
↵
) to send the value setting to the printer.
!
(
) to return to the previous screen without updating