Resolution - Kodak VERSAMARK DP5120 Operator's Manual

20) RESOLUTION

Select the print resolution, which is the degree of sharpness of an image,
measured in dots per inch (dpi). Vertical print resolution is perpendicular
to document movement, while horizontal resolution is parallel to
document movement. Control Panel only displays the parameter options
available for the printer you are operating.
When the print resolution is changed, the printer reloads its embedded
fonts. This operation may take several minutes.
When printing at high resolution, use a high resolution font and set the
printhead height at 0.12 in. (0.30 cm) or less from the substrate.
Use the arrow keys to select one of the following displayed options, then
↵
press to confirm the selection:
120x120
Standard resolution for the 5120 and 5122
120x240
High resolution for the 5120 and 5122
240x240
Standard resolution for the 5240
240x480
High resolution for the 5240.
Note: This parameter cannot be changed while the printer is in the Ready State.
Remote Control Panel Procedures
Operator's Guide
Keypad
27