Installation
You will find the DIL-switches in the small Smart Card drawer labeled
"PUSH" behind the scanner front streamer. To access the switches
remove the streamer, push the drawer inwards and release so it pops
open and remove the Smart Card.
Figure 3-4 Access the DIL-switches
Important: Remember to reinsert the Smart Card when finished
setting the DIL-switches and before turning power on.
SCSI DIL-Switches – Factory Default Settings
SCSI Device Address
SCSI Device Address
SCSI Device Address
SCSI Built –in Termination
No Synchronous Transfer
Not in use
Force Boot Start up
Continuous Test Mode
3-11
1
2
3
4
5
6
7
8