Furuno GP-1670F Operator's Manual page 70

6. MAP SETTINGS, 2D PERSPECTIVE/3D DISPLAYS AND SATELLITE OVERLAY
[CHART LANGUAGE]: Use [Language] to select the chart language to use to show
chart information (place names, etc.), among English and major European and Asian
languages. Use [Mode] to select what language to display chart information in.
[Off]: Chart information is shown in English when it is not available in the chart lan-
guage selected.
[English]: Chart information is shown in the chart language selected when English is
not available.
[Local]: Chart information is shown in the local language when it is not available in the
chart language selected.
[CURRENTS PREDICTION]: Predict current (tide) movement in the specified time in-
terval.
03-16-12
SPD 1.9 kn
Rotate the RotoKey
Push the RotoKey
to enter the date for which to show predicted current movement.
[CHART DISPLAY]: Setup the overlay displays.
[PLOTTER WINDOW]: Select which display to apply the settings of [CHART DIS-
PLAY] in the 2-way split screen for the plotter display. The default setting puts the dis-
play on the left half.
[DISPLAY MODE]: Select the chart display mode, among [2D], [2D Perspective] and
[3D].
[OVERLAY]: Select the type of overlay to use, among [Vector], [Satellite], [Raster] and
[Chart Shading] (not available in the 3D display).
[OVERLAY MODE]: Select where to display the overlay, [On Land], [On Sea] or [On
All]. (Available in 2D and 2D perspective modes when [Satellite] or [Chart Shading] is
selected at [Overlay].)
[TRANSPARENCY]: You can set the level of transparency for the satellite photo on
the water. The higher the figure the greater the level of transparency.
[3D EXAGGERATION FACTOR]: Set the level of the 3D exaggeration factor, Level 1
to Level 5, to view topographical features more easily. The higher the number the
greater the exaggeration.
[MAP CONFIGURATION]: Show or hide various objects to set the level of detail for
your maps. [Display Mode] offers four preset levels (full, medium, low and tides) plus
a custom level which you can set according to your needs. The table on the next page
shows the settings for each of the four preset levels. You can zoom in the chart range
over the range which is limited by the chart when setting [Off] in [CHART LOCK]. How-
ever, if done the chart can not be displayed correctly.
6-2
01:25:32:PM
DIR 302
TM
to set the time for which to show predicted current movement.
TM
for three seconds to enable entry of date. Use the CursorPad