Navigation Data Boxes; How To Select The Data To Display In A Box - Furuno GP-1670F Operator's Manual

1. OPERATIONAL OVERVIEW
1.7

Navigation Data Boxes

The navigation data boxes, displayed at the bottom of the screen, show various navi-
gation data fed from the sensors connected to the display unit. Two or four boxes can
be displayed and you can freely change the data shown in each box. The data that
you can show depends on your system configuration. The boxes can be shown or hid-
den with the [Nav Data] soft control.
Note: Waypoint name, distance to WPT, bearing to WPT, XTE, TTG and ETA are not
available unless you are navigating to a point or route. Bars (--) are shown in the re-
spective box when the data is not available.
1.7.1

How to select the data to display in a box

1. Open the full RotoKey menu then choose [Select Data]. The background color of
all but one of the boxes is grey.
Box not greyed out is
currently selected box.
2. Rotate the RotoKey
the [Select Data] (data category) window.
3. Select a data box category, and a window with choices relevant to your selection
appears.
Navigation
4. Select the data desired.
1-10
kn
kn
TM
to select the data box to change then push the key to show
DST
BRG
Speed/
Bearing
Depth
Environment Wind