Operating In System Mode; 1 ] Calling Up The Desired Set Screen - Denso BHT-300B User Manual

2.5.2 Operating in System Mode

Some functions in System Mode require several screens to be shifted, as shown in the example below.

[ 1 ] Calling up the desired set screen

First, select a desired item on the current screen by using the numerical key or the cursor keys (F5 and
F6) so as to highlight the desired item.
Press the ENT key to establish the selected item and proceed to the subsequent screen.
To return to the preceding screen, press the C key.
Press 4 or use F5 and F6
to select "4:SET
SYSTEM."
Press 5 or use F5 and F6
to select
"5:COMMUNICATION."
Press 3 or use F5 and F6
to select "3:COM
PORT."
Chapter 2 Getting Started the BHT and System Mode
ENT key
ENT key
ENT key
41
C key
C key
C key