Operating In System Mode; Starting System Mode - Denso BHT-8000 User Manual

2.5 Operating in System Mode

System Mode is an operating software exclusively designed for the effective use of the BHT, which
includes various functions as shown on the following pages.
The contents of System Mode differ depending upon whether or not the BHT system program supports
LAN communication. BHT system program version 2.XX or later supports it.

2.5.1 Starting System Mode

To start up System Mode, turn the BHT on while holding down the SF and 1 keys. This operation calls up
the SYSTEM MENU on the LCD as shown below.
The function selected is highlighted (white-on-black) with the cursor. To select a desired item in System
Mode, press the corresponding numerical key and then press the ENT key.
The keys below are so designed that the function of each key is consistent in every screen.
Numerical keys
ENT key
F5 and F6 keys
F7 and F8 keys
The C key is inoperative on the SYSTEM MENU. On other screens, pressing the C key returns to the
immediately preceding screen.
The power-on default is "EXECUTE PROGRAM" which is highlighted. Once any other item is selected,
the selected item will become highlighted with the cursor when you turn back to the SYSTEM MENU.
("7:FTP" available in LAN-support BHT system only)
Pressing a numerical key corresponding with a desired menu
number selects the desired item displayed on the screen.
Pressing this key registers the selected item and executes the
corresponding function.
Pressing the F5 and F6 keys moves the cursor up and down,
respectively, to select a desired item.
Pressing the F7 and F8 keys moves the cursor to the left and right,
respectively, to select a desired setting.
39
Chapter 2 Getting Started the BHT and System Mode