Denso BHT-300B User Manual page 65

Upload screens
⇓
⇓
⇓
If you select "1: ONE FILE" and choose a file to be uploaded or if you
select the "2: ALL FILES" or "3:HT<-->HT COPY" on the UPLOAD
menu, then the screen shown at left appears.
Selecting "2: ALL FILES" or "3: HT<-->HT COPY" displays "ALL" or
"HT<-->HT" in the center of the 2nd line, respectively.
Showing this screen, the BHT waits for a file(s) to be uploaded.
Upon start of BHT-BASIC4.0 Transfer Utility
the BHT displays the screen shown at left.
(Refer to the "BHT-BASIC4.0 Transfer Utility User's
While the uploading operation is in progress, the screen shown at left
is displayed indicating the file name and the number of sent
records/the total number of records
(in kilobytes) in transfer with YMODEM).
To abort the uploading operation, press the C key.
switches back to the UPLOAD menu.
Upon completion of uploading, the number of sent records
sent file size) becomes equal to the total number of
total file size) and the beeper beeps once. Press the C key to return to
the UPLOAD menu.
If you have selected "2: ALL FILES" or "3: HT<-->HT COPY" on the
UPLOAD menu, a sequence of the above screens will be repeated by
the number of files to be uploaded.
51
Chapter 2 Getting Started the BHT and System Mode
(the sent file size/the total file size
or equivalent program,
Guide.")
The screen
(or the
records (or the