Denso BHT-300B User Manual page 35

(3) On the SET SYSTEM screen, press the 3 key to select the
"DATE/TIME" and then press the ENT key. The screen shown at
left will appear.
(4) Use the numerical keys to enter the year (only the last two digits),
month, day, hour, and minute in this order. If the data is in a single
digit, add a 0 (zero) preceding the data.
For the year, be sure to enter the last two digits of the year. For the
hour, enter it in the 24-hour format.
If any of the year, month, day, hour, and minute is not entered, the
ENT key will be deactivated.
If you make a wrong entry, press the BS key to delete it and then
enter the correct data.
[Example] To set 2004, January 19, at 4:00 p.m.
Press 0 , 4 , 0 , 1 , 1 , 9 , 1 , 6 , 0 , and 0.
(5) Press the ENT key to register the above setting.
(6) Press the C key to return to the SET SYSTEM screen.
21
Chapter 2 Getting Started the BHT and System Mode