Denso BHT-300B User Manual page 100

PING run-time messages (that will appear in the middle of the LCD)
Message
Waiting
Opening TCP/IP
Routing TCP/IP
PING start
Device error
TCP/IP error
PING termination messages (that will appear in the bottom of the LCD)
Message
PING end
PING aborted
PING error
(2) Setting PING parameters
Displays when:
Setting up PING.
Opening devices.
Connecting to the TCP/IP communications pathway.
Starting PING.
Failed to open a device.
Failed to connect to the TCP/IP communications pathway.
Displays when:
PING has ended normally.
PING has aborted.
An error has occurred during running of PING.
On the TEST PING menu, select "2: SET PING" to call up the screen
shown at left where the current settings are displayed.
[1] DESTINATION IP: Specifies the IP address of a host PC that you
[2] DATA SIZE:
[3] INTERVAL:
[4] TIMEOUT:
[5] COUNT:
[6] SEND TYPE:
The entry range for each of "2:DATA SIZE" through "5:COUNT" items
is listed on the next page.
Select a desired item by using the numerical keys or F5 and F6 keys.
want to ping.
Specifies the data size of an echo request.
Specifies the echo request intervals (in units
of 100 ms).
Specifies the timeout period (in units of 100
ms) for an echo request.
Specifies the number of echo requests to be
sent.
Selects the echo request send timing TYPE 1
or TYPE 2. (See page 88.)
86