Remote Viewing On The Mac; Prerequisites - Digimerge DH100 Series Instruction Manual

Remote Viewing on the Mac

REMOTE VIEWING ON THE MAC
You can remotely connect and configure your DVR using the Safari browser in Mac OSX 10.6 or
above.

Prerequisites

• Port (or whichever port your system is using) must be port forwarded to your router
80
• You must create a DDNS account, and have the DDNS settings configured in your DVR
• The DVR must have internet access
• You must have a Digimerge DDNS address to log in remotely
Step 1 of 2: Installing iDVR:
1. In the address bar, enter your system's IP address or your Digimerge DDNS domain followed
by :80 — for example, http://192.168.1.1:80 or http://tomsmith.digimerge.net:80
NOTE: You MUST include http:// in order to access your system.
2. Click Download DVR Remote Desktop (Mac OSX 10.6 or above). Wait for the file to download.
• The file saves into your Download folder.
3. Double-click the file to extract the contents. The file extracts into the iDVR icon (
80
).