Configuring General System Settings
To configure general system settings:
1. Open CMS-DH to access the Login window and then click Setup (Or, click File> Setup once
you are logged in to CMS DH)
2. Configure the following in the Setup menu:
• OSD Setup: Configure the on-screen display items that you want to appear in the channel
(i.e. camera name, time, frame rate etc.).
• Password: Change the CMS-DH login name and password. Enter your desired ID (user name)
and password, and then click OK to save your settings.
• Miscellaneous: Select the items you wish to enable:
• Check Watermark: Not Supported
• Keep Opened Window: Automatically re-opens the windows that were closed after you
restart the program.
• E-Map Link Event: When selected, the E-map will open pop-up windows when an event
occurs (setup required).
• De-interlace: Not Supported
• Sequence Time: Enter the sequence time of each DVR.
• Alert Window Time: Enter the amount of time the Alert window remains on screen.
• Video Standard: Select from NTSC or PAL video output.
• Video Render: Select the DirectX type of your system. Select VMR7 if your system uses Direct
X 7.0. Select VMR9 if your system uses Direct X 9.0.
• Video Channel: Select the maximum amount of DVR channels that the software displays.
Choose Max 16 for 16 maximum channels, Max 64 for 64 maximum channels.
• Download Folder: Select the download destination on your hard drive. The download folder
stores saved videos and images. Click the browse button (
directory.
CMS-DH Central Management Software
Setup
) to select the default download
53