Changing Viewing Modes - Digimerge DH100 Series Instruction Manual

Changing viewing modes

To change the viewing modes of CMS-DH:
1. Log in to CMS-DH, and connect to a DVR.
2. Click (
Sequencing
If you monitor multiple DVRs, you can have each tab change continuously. This process is called
sequencing. You can perform sequencing as long as you have two or more DVRs. Virtual DVR's
work with sequencing as well.
Prerequisite
• Log in to two or more DVRs
To start a sequence:
• Click the Sequence button (
NOTE: To change the sequence time, click File>Setup. Under "Miscellaneous", enter the
desired sequence time in seconds, and click Ok.
64
)to change the viewing mode (single-channel, quad-channel etc).
).
The two DVR tabs will continually switch between eachother
Click to change viewing modes
Sequence button