Sensor Setup - Digimerge DH100 Series Instruction Manual

Sensor Setup

The Sensor Setup window allows you to
configure the sensor type, and the alarm
duration.
To configure Sensor Setup settings:
1. From the EVENT SETUP window, click
.
Sensor Setup
2. Configure the following:
• Alarm Duration (Seconds): Enter the
duration the system alarm continues to
activate after an event.
• Sensor Popup: When a sensor triggers, the
corresponding channel will open in full-
screen mode.
• Polarity: Select N.O (normally open) or N.C
(normally closed).
• All Off: Turns all alarm sensors off.
• All N.O: Selects all sensors as N.O
(normally opened).
• All N.C: Selects all sensors as N.C
(normally closed).
3. Right-click and click Yes to save your
settings.
Using the Main Menu
29