Configuring The Touch Screen - Crestron TPMC-4SM Operations & Installation Manual

4.3" Touch Screen with Room Scheduling
12 • 4.3" Touch Screen with Room Scheduling: TPMC-4SM

Configuring the Touch Screen

NOTE: The only connection required to configure the touch screen is power. Refer
to "Hardware Hookup" on page 26 for details.
NOTE: The TPMC-4SM can take up to 45 seconds to boot to a display after initial
power up.
The setup screens allow basic configuration procedures prior to regular operation of
the touch screen. To enter the setup screens, touch the screen while applying power
to the unit. The setup screens can also be entered by pressing the top four push
buttons on the left side of the touch screen twice in sequence (1, 2, 3, 4, 1, 2, 3, 4).
Refer to the following illustration for push button numbering.
Push Button Layout and Join Number Assignment
The "Panel Setup Options" menu opens. The functions provided by each button are
detailed in subsequent paragraphs.
"Panel Setup Options" Menu
Crestron TPMC-4SM
Operations & Installation Guide – DOC. 6845E