Rinnai V2532FFU Series Operation & Installation Manual page 14

Setting The Sound Volume
To do this, press the 'Function' Button, the default voice prompt sound volume is medium, each
subsequent press of the
the following order: High Voice - Off Voice (beep) - Off Sound (no beep) - Low Voice - Medium
Voice.
Setting The Clock (MC-100V Deluxe Controller ONLY)
The clock is a 12 hour AM/PM style display. To set the time, press the 'Function' Button twice
within 10 seconds. Press the
the time you wish to set, press the button intermittently to avoid going further than the desired
time.
Press the 'Function' Button again to complete setting the clock and return to normal operation.
Adjusting Temperature
Simply press the
Monitor.
To Operate the hot water unit, open any hot water tap. This will automatically light the burner
providing hot water. The red fl ame of the water heater 'In Use Indicator'
the Controller.
Once the hot water is running, if the set temperature is either too hot or cold, press the
buttons until the desired temperature is reached.
Rinnai America
DELUXE CONTROLLER
and Button will cycle through the available volume settings in
and
or buttons until the required temperature is displayed on the Digital
ON! ON!
HOT HOT
TEMPERATURE CANNOT BE
ADJUSTED EXCEPT BETWEEN
O
98
HOT WATER TAP IS OPEN.
Buttons to adjust the time. When you get close to
COLD COLD
O
F AND 110 F WHEN ANY
14
will illuminate on
or
FF Models