Beeper Pitch - Error; Beeper Duration - Good Read; Led - Good Read; Number Of Beeps - Good Read - Honeywell Xenon 1900 User Manual

Beeper Pitch – Error
The beeper pitch codes modify the pitch (frequency) of the sound the scanner emits when there is a bad read or error.
Default = Razz.
* Razz (250 Hz)
High (4200 Hz)
Beeper Duration – Good Read
The beeper duration codes modify the length of the beep the scanner emits on a good read. Default = Normal.
* Normal Beep
LED – Good Read
The LED indicator can be programmed On or Off in response to a good read. Default = On.
* LED - Good Read On
Number of Beeps – Good Read
The number of beeps of a good read can be programmed from 1 - 9. The same number of beeps will be applied to the
beeper and LED in response to a good read. For example, if you program this option to have five beeps, there will be five
beeps and five LED flashes in response to a good read. The beeps and LED flashes are in sync with one another. To
change the number of beeps, scan the bar code below and then scan a digit (1-9) bar code and the Save bar code on the
4 - 4
Medium (3250 Hz)
Short Beep Short Beep
LED - Good Read Off