Mounting a CCB01-010BT Charge Base
Mounting a CCB02-100BT Base
The CCB02-100BT Base can be mounted on either a horizontal or vertical surface. The cables can be routed through either the
top or the bottom of the base.
The cables can be routed down through the bottom of the base, securing the cables in the wireways.
The cables can also be routed up through the top of the base, crossing them over and securing the cables in the wireways.
When routing the cables up through the top of the base, be sure to cross the cables over before placing in the wireways. If not,
too much strain is placed on the cable connectors.
1 - 8
2.8 in.
72.1mm
3.35 in.
85.09mm
2.36 in.
59.84mm
8x32 thread
x .39 in. (10mm) deep