Table of Contents
Advertisement
CHARGER OPERATIONS (cont.)
INFORMATION DISPLAYED DURING OPERATION
1. CHARGING STATUS MONITOR
When the charger is operating, the
user can easily check the real-time
status of the charging capacity, cell
voltage, charging time, as well as
external and internal temperatures.
3. BALANCE STATUS
When charging Lithium chemistry batteries in balance mode, you can moni-
tor the balance status and internal resistance of the battery pack.
Note: The internal battery resistance also includes the leads and con-
nectors in the calculation.
22
2. GRAPH
The X1 Touch also has the ability to
display the total pack voltage in a
graph which helps the user monitor
the charging status. Touch "GRAPH"
to show the charging or discharg-
ing curve.
USING THE CHARGE MASTER CHARGE CONTROL SOFTWARE
Visit the Hitec RCD USA (www.hitecrcd.com) website to download the free
CHARGE MASTER software for Windows PC's. With the Charge Master soft-
ware, you can control your charger settings, initiate the operation process,
monitor a variety of processes, load data and update your charger's fi rm-
ware.
VOLT METER
Using the VOLT METER function, you have the ability to check the total volt-
age of your battery pack. If you are checking a Lithium chemistry battery
attached to a balancing board, you can also see the highest voltage, lowest
voltage and each individual cell's voltage.
CHARGER OPERATIONS (cont.)
Connecting a Lithium chemistry
battery attached to a balance board
to see individual cell voltages.
Connecting a battery directly to the
charger to see the total voltage of
a pack.
23
Advertisement
Table of Contents
