Program Start; Program Stop; Program Complete - HITEC X1 Touch Instruction Manual

CHARGER OPERATIONS (cont.)

3. PROGRAM START

Touch the start button or touch and hold the framed Operation Program
for 3 seconds to start the program. The charger will check the number of
battery cells automatically. If the detected result and your setting match, the
charger will begin the selected operation.
Information Displayed during Operation
Battery Information >
Capacity Supplied >
Elapsed Time >
Charge/Discharge >
Current
If the settings are incorrect, an error message will be displayed. Touch the Home
button to go back to the main menu and correct the setting before proceeding.
20

4. PROGRAM STOP

To stop the charge or discharge process, touch STOP. The process will stop
and you will be taken back to the Main Menu

5. PROGRAM COMPLETE

When the program progress is completed, an audible sound will be heard
and the charger will display the completed process information.
< Current Operations
< Pack Voltage
< External Temperature*
< Internal Temperature
*when used with optional
temperature probe
CHARGER OPERATIONS (cont.)
21