Operation - HITEC X2 High Power Operation Manual

Operation

Exit to Main Menu
Stop Any Charge Processes
BATT PROG / STOP Button:
Stop a function in- progress or to go back to previous step/screen.
DEC Button:
Scroll through menus or decrease the parameter value.
INC Button:
Scroll through the menus or increase the parameter value.
ENTER / START Button:
Enter parameters or store parameters on-screen.
When changing a parameter value in the program, press the START/ENTER
button to make it blink, then change the value by pressing the DEC and INC
button. The value will be stored by repressing the START/ENTER button. If there
is a second parameter to edit on the same screen, it will begin blinking after you
confi rm the fi rst parameter value.
When you power the charger on, it will automatically enter the LiPo Battery
balance program screen. You can change the mode (balance mode, normal
charge mode, fast charge mode, store mode, or discharge mode), enter the
desired charging/discharging mode, or set the preferred parameter to begin. If
there are no changes to make in the LiPo Battery program, press the BATT PROG/
STOP button to enter the BATT PROGRAM screen.
14
Resume or Start Charge
Processes Confi rm Any Action
Alter Values
See the Status of Individual
Cells in Balance Charge Mode