Various Information In The Program - HITEC X1 Instruction Manual

VARIOUS INFORMATION IN THE PROGRAM

VARIOUS INFORMATION IN THE PROGRAM
You can view various information on the LCD screen during the charging
and discharging process. Pressing the DEC key will display these settings.
You can press the INC key to monitor the voltage of each cell while the
battery is connected to each port of the charger.
End Voltage
12.6V(3S)
DEC
Capacity Cut-Off
ON 5000mAh
DEC
Safety Timer
ON 200min
DEC
Temp. Cut-Off
ON 80C 176F
DEC
Ext.Temp
DEC
4.14 4.16 4.09
0.00 0.00 0.00
This screen shows the final voltage when the
program has ended.
This screen shows that the capacity cut-off
function is turned on and shows the setting
capacity value.
This screen shows that the safety timer is on
and duration of time in minutes.
This screen shows the temperature cut-off
function is turned on.
The external temperature is displayed when
26C
the temperature probe is used.
When the battery is connected with each port
through a cable, you can check voltage of
each cell in the battery pack. When the cable
is connected to the ports on the charger, the
program will display voltage of up to 6 batteries.
- 25 -