Introduction; Parts Layout; Specifications And Charger Layout - HITEC X1 Touch Instruction Manual

INTRODUCTION (cont.)
Congratulations on your choice of the Hitec X1 Touch digital, intelligent touch
screen interface charger from Hitec RCD USA. The Hitec X1 Touch is a high-per-
formance, microprocessor controlled charge/discharge station with battery
management capabilities that are suitable for use with most popular battery
types. The X1 Touch also features integrated balancing for six-cell, Lithium-
Polymer (LiPo), Lithium-Ferrite (LiFe) and Lithium-Ion (Li-Ion) batteries.

Parts Layout

This unit is simple to use, but the operation of a sophisticated automatic
charger such as the Hitec X1 Touch requires some knowledge on behalf of
the operator. These operating instructions are designed to ensure that you
can quickly become familiar with its functions and capabilities. It is impor-
tant that you read this manual in its entirety before you attempt to use the
X1 Touch charger for the fi rst time.
4
1. Hitec X1 Touch Charger
2. AC Power Cord
3. DC Power Cord
4. 18AWG Wire Charging Cable
5. Balancing Board Cable
6. Universal Balancing Board

SPECIFICATIONS AND CHARGER LAYOUT

Specifi cations
AC Input
DC Input
Charge circuit power
Charge current range
Discharge current range
Discharge current power
Current drain for balancing port
NiCd/NiMH battery cell count
LiPo/LiFe/Lilon cell count
Pb battery voltage
Net weight
Color LCD Touch Screen
3.2" (320 x 420 dot)
Air Intake Duct
Temperature Probe
Socket
Smart
Cooling Fan
Tilt Stand
AC Input
Universal Balancing
Power Port
Board
100-240V AC
100 - 240 Volts AC
11-18 Volt DC
55 Watts
0.1 - 7.0 Amps
5 Watts
0.1-2.0 Amps
200mA per cell
1-15 Cells
1-6 Cells
2-20V
19 oz.
DC Input
11-18V AC
Balance Socket - XH
Battery Socket
USB Port for PC
Control & Firmware
Upgrade
5