Yaesu VX-3E Operating Manual page 19

AM
7. Rotate the DIAL knob to select the desired Broadcast station.
8. When a signal is received in the amateur band, the amateur band audio is output to the
speaker. The AM or FM Broadcast station will no longer be heard. When the amateur
band signal drops, the AM or FM Broadcast station will be heard from the speaker,
and SUB-RX Operation is resumed (the amateur band frequency
is monitored while the AM broadcast station is heard from the
speaker) according to the SUB-RX Operation Resume mode se-
lected in step 3 above.
9. You may monitor the amateur band forcibly by holding the MONI switch.
To disable the SUB-RX Operation, just repeat the above procedure, rotating the DIAL
knob to select "OFF" in step 3 above.
1) You may transmit with the VX-3R/E on the frequency set in step1 above by
pressing the PTT switch, even if the SUB-RX Operation is activated.
2) If you change the [T.CALL] key to the "monitor" function via the Set
Mode Item 47: M/T-CL, you may change the frequency of the amateur band by rotating
the DIAL knob while pressing the [T.CALL] key.
3) When the [V/M] key is pressed, the VX-3R/E recalls AM and FM Broadcast station
memories only. In this case, the "
VX-3R/E O
PERATING
FM B
AND ROADCAST
" icon will blink.
M
ANUAL
O
PERATION
R
ECEPTION
17