Yaesu VX-3E Operating Manual page 111

Set Mode Item 7 [ ARTSIT ]
Function: Selects the Polling Interval during ARTS™ operation.
Available Values: 15SEC/25SEC
Default: 25SEC
Set Mode Item 8 [ BCLO ]
Function: Enables/Disables the Busy Channel Lock-Out feature.
Available Values: ON/OFF
Default: OFF
Set Mode Item 9 [ BEL.RNG ]
Function: Selects the number of Bell ringer repetitions.
Available Values: 1T - 20T/CONT (Continuous ringing)
Default: 1T
Set Mode Item 10 [ BEL.SEL ]
Function: Enables/Disables the Bell ringer function and its sound selection.
Available Values: OFF/BELL/USRBP1/ USRBP2/ USRBP3
Default: OFF
Note: This Set Mode Item can select and set the function to each memory channel indi-
vidually.
Set Mode Item 11 [ BNK.NAM ]
Function: Stores Alpha-Numeric "Tags" for the Memory Banks.
See page 49 for details.
Set Mode Item 12 [ BP ED ]
Function: Enables/Disables the Band-edge beeper while selecting the frequency by the
DIAL knob.
Available Values: ON/OFF
Default: OFF
Set Mode Item 13 [ BP LVL ]
Function: Adjust the Beep volume level.
Available Values: LVL 1 - LVL 9
Default: LVL 5
Set Mode Item 14 [ BP SEL ]
Function: Enables/Disables the Keypad beeper.
Available Values: OFF/KY+SCN/KEY
Default: KY+SCN
OFF: The Beeper is disabled.
KY+SCN: The beeper sounds when you press a key or when the scanner stops.
KEY: The beeper sounds when you press any key.
VX-3R/E O
PERATING
M
ANUAL
S M
ET ENU
M
ODE
109