Yaesu VX-3E Operating Manual page 117

Set Mode Item 44 [ LAMP ]
Function: Selects the LCD/Keypad Lamp mode.
Available Values: KEY 2S - KEY10S/CONT/OFF
Default: KEY 5S (5 seconds)
KEY 2S - KEY10S: Illuminates the LCD/Keypad for the selected time, when any key is
CONT:
OFF:
Set Mode Item 45 [ LED LT ]
Function: Illuminates the TX/BUSY indicator. It will glow continuously white (useful as
emergency flashlight at night).
Set Mode Item 46 [ LOCK ]
Function: Selects the Control Locking lockout combination.
Available Values: KEY/PTT/KY(KEY)+PTT
Default: KEY
Set Mode Item 47 [ M/T-CL ]
Function: Selects the function of the MONI/T.CALL switch (just below the PTT switch)
function.
Available Values: MONI/T-CALL
Default: Depends on the transceiver viersion.
MONI: Pressing the MONI/T.CALL switch will over ride the Noise/Tone Squelch, al-
lowing you to listen for weak (or non-encoded) signals.
T-CALL: Pressing the MONI/T.CALL switch activates a 1750-Hz burst tone, used for
repeater access in many countries.
Set Mode Item 48 [ MCGAIN ]
Function: Adjust the microphone gain level.
Available Values: LVL 1 - LVL 9
Default: LVL 5
This Set Mode setting affects both internal and external microphones.
Set Mode Item 49 [ MR DSP ]
Function: Toggles the display indication between "frequency" and "Alpha/Numeric" chan-
nel tags.
Available Values: ALPHA/FREQ
Default: FREQ
Note: This Set Mode Item can select and set the function to each memory channel indi-
vidually.
VX-3R/E O
PERATING
pressed.
Illuminates the LCD/Keypad continuously.
Disables the LCD/Keypad illumination
M
ANUAL
S M
ET ENU
M
ODE
115