Changing The Status Of The [ ] Key - Yaesu VX-3E Operating Manual

C
HANGING THE
By factory default, the [ VOL ] key keeps the status while pressing and holding the [ VOL ]
key down. You may change the status of the [ VOL ] key to keep the status for approxi-
mately three seconds after pressing the [ VOL ] key, after which time it reverts back to its
previous status.
1. Press and hold in the [ TXPO ] key for one second to enter the Set mode.
2. Rotate the DIAL knob to select the Set Mode Item 92: VOL MD.
Note: Do not forget to pull the DIAL knob to rotate the DIAL
knob.
3. Press the [ TXPO ] key momentarily to enable adjustment of this
Set Mode Item.
4. Rotate the DIAL knob to select the desired mode.
NORMAL: The [ VOL ] key keeps the status while pressing and
holding the [ VOL ] key down.
AUT.BCK: The [ VOL ] key keeps its status for approximately
three seconds after pressing the [ VOL ] key.
5. When you have made your selection, press the PTT switch to save the new setting and
exit to normal operation.
VX-3R/E O
PERATING
M
S
TATUS OF THE
M
ANUAL
ISCELLANEOUS
VOL K
S
ETTING
EY
101