Robertshaw RS4110 Installation Manual page 12

Press to step through the following:
Installation Tests for Single Stage Models
Demand
First Stage Heat
First Stage Cool
* G, will be off (not displayed) for Non-HP with Gas.
Installation Tests for Multi-Stage Models
Demand
First Stage Heat
Second Stage
Heat
Third Stage /
Emergency Heat
First Stage Cool
Second Stage
Cool
* G, will be off (not displayed) for Non-HP with Gas
The display will now show the day, the
setpoint, fan setting and off.
Exiting the Installation Test Utility returns the
thermostat to normal operation.
Refer to the User Manual to change day, time and schedule.
The Thermostat is now ready to begin operation.
The thermostat will be in the OFF (default) mode at start up.
The following sections will explain how to select the mode of operation
and how to protect the settings.
Conventional (Non-HP)
Terminal
W1 + G*
Y1 + G
Conventional (Non-HP)
Terminal
W1 + G*
W1 + W2 + G*
N/A
Y1 + G
Y1 + Y2 + G
Display
Y1 + G + O
Display Terminal
Y1 + G + B
Y1 + W2 +G + B
2
Y1 + G + O
Y1 + Y2 + G + O 2
2
12
Heat Pump (HP)
Terminal Display
Y1 + G
Heat Pump (HP)
Display
E + G
E
2