Trailer Sway Control (Tsc) - Jeep Grand Cherokee 2013 Owner's Manual

NOTE: To improve the vehicle's traction when driving
with snow chains, or starting off in deep snow, sand, or
gravel, it may be desirable to switch to the "Partial Off"
mode by pressing the "ESC OFF" switch. Once the
situation requiring ESC to be switched to the "Partial
Off" mode is overcome, turn ESC back on by momen-
tarily pressing the "ESC OFF" switch. This may be done
while the vehicle is in motion.
4WD Low Range
Partial Off
This is the normal operating mode for ESC in 4WD LOW
range. Whenever the vehicle is started in 4WD LOW
range, or the transfer case (if equipped) is shifted from
4WD HIGH range or NEUTRAL to 4WD LOW range, the
ESC system will be in the "Partial Off" mode.

Trailer Sway Control (TSC)

TSC uses sensors in the vehicle to recognize an exces-
sively swaying trailer and will take the appropriate
actions to attempt to stop the sway. The system may
reduce engine power and apply the brake of the appro-
priate wheel(s) to counteract the sway of the trailer. TSC
will become active automatically once an excessively
swaying trailer is recognized. No driver action is re-
quired. Note that TSC cannot stop all trailers from
swaying. Always use caution when towing a trailer and
follow the trailer tongue weight recommendations. Refer
to "Trailer Towing" in "Starting and Operating" for
further information. When TSC is functioning, the "ESC
Activation/Malfunction Indicator Light" will flash, the
engine power may be reduced and you may feel the
brakes being applied to individual wheels to attempt to
stop the trailer from swaying. TSC is disabled when the
ESC system is in the "Partial Off" mode.
STARTING AND OPERATING 513
5