Jeep Grand Cherokee 2013 Owner's Manual page 593

7. Using the point of a ballpoint pen or similar object,
press and hold the recessed transfer case NEUTRAL (N)
button (located by the selector switch) for four seconds.
The light behind the N symbol will blink, indicating
shift in progress. The light will stop blinking (stay on
solid) when the shift to NEUTRAL (N) is complete. A
"FOUR WHEEL DRIVE SYSTEM IN NEUTRAL" mes-
sage will display on the EVIC (Electronic Vehicle Infor-
mation Center). Refer to "Electronic Vehicle Informa-
tion Center (EVIC)"
Instrument Panel" for further information.
in "Understanding Your
NEUTRAL (N) Switch
8. After the shift is completed and the NEUTRAL (N)
light stays on, release the NEUTRAL (N) button.
9. Start the engine.
10. Shift the transmission into REVERSE.
STARTING AND OPERATING 591
5