Jeep Grand Cherokee 2013 Owner's Manual page 360

358 UNDERSTANDING YOUR INSTRUMENT PANEL
and release the SELECT button until a check-mark ap-
pears next to the feature showing the system has been
activated or the check-mark is removed showing the
system has been deactivated.
For further information, refer to "Adaptive Cruise Con-
trol (ACC)" in "Understanding The Features Of Your
Vehicle."
Park Assist System
The Rear Park Assist system will scan for objects behind
the vehicle when the transmission is in the REVERSE
position and the vehicle speed is less than 11 mph
(18 km/h). The system can be enabled with Sound Only,
Sound and Display, or turned OFF through the EVIC. To
make your selection, scroll up or down until the pre-
ferred setting is highlighted, then press and release the
SELECT button until a check-mark appears next to the
setting, showing that the setting has been selected. Refer
to "Rear Park Assist System" in "Understanding The
Features Of Your Vehicle" for system function and oper-
ating information.
Display Units Of Measure In:
The EVIC, odometer, and Uconnect gps (if equipped)
can be changed between English and Metric units of
measure. To make your selection, press and release the
SELECT button until "ENGLISH" or "METRIC" appears.
Liftgate Chime
When this feature is selected the chime will sound when
the liftgate is in operation, signaling that the liftgate is in
operation. To make your selection, press and release the
SELECT button until a check-mark appears next to the
feature showing the system has been activated or the
check-mark is removed showing the system has been
deactivated.