Jeep Grand Cherokee 2013 Owner's Manual page 187

WARNING! (Continued)
• Do not place anything on the seat or seatback that
insulates against heat, such as a blanket or cushion.
This may cause the seat heater to overheat. Sitting
in a seat that has been overheated could cause
serious burns due to the increased surface tempera-
ture of the seat.
Vehicles Equipped with Remote Start
On models that are equipped with remote start, the driver's
heated seat and heated steering wheel can be programmed
to come on during a remote start. Refer to "Remote Starting
System — If Equipped" in "Things To Know Before Starting
Your Vehicle" for further information.
Front Heated Seats
There are two heated seat switches that allow the driver and
passenger to operate the seats independently. The controls
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 185
for each heater are located near the bottom center of the
instrument panel (below the climate controls).
You can choose from HIGH, LOW or OFF heat settings.
Amber indicator lights in each switch indicate the level of
heat in use. Two indicator lights will illuminate for
HIGH, one for LOW and none for OFF.
Press the switch once to select HIGH-level
heating. Press the switch a second time to select
LOW-level heating. Press the switch a third
time to shut the heating elements OFF.
NOTE: Once a heat setting is selected, heat will be felt
within two to five minutes.
When the HIGH-level setting is selected, the heater will
provide a boosted heat level during the first four minutes of
operation. Then, the heat output will drop to the normal
HIGH-level. If the HIGH-level setting is selected, the system
will automatically switch to LOW-level after approximately
3