Table of Contents
Advertisement
4. Click Refresh.
5. In the search results, select the studies to archive.
The Location column indicates which studies are only in cache (C for cache) and not also in an
archive location (such as P for PACS archive).
6. Click Store to Archive.
7. To update the status of the selected studies, click Refresh.
8. Ensure that all studies are archived.
5.
Closing and mirroring archive volumes
Close all open primary volumes before upgrading. Open mirror volumes are closed automatically when
a SYNC job completes successfully with the corresponding closed primary volume. Fresh volumes may
remain open as they do not contain any studies.
If the system has a jukeboxarchive, you may have to wait for the sync job to finish. If the system is a
non-jukebox archive, you should perform a mirror procedure manually, where applicable, to ensure
that a backup of the data exists.
6.
Emptying all queues
Monitor the Job Manager to make sure that all the queues are empty and that all jobs are completed
prior to migration.
To empty all queues
1. In the Administration Tools, on the Daily tab, select Job Manager.
2. If an archive job remains in any of the queues, select the job and click Expedite Selected Job(s).
3. If any other job remains in any of the queues, select the job and click Delete selected job(s).
7.
Halting the archive queue
When all archive jobs have been successfully handled, halt the Archive queue to stop studies from
moving around the system.
To halt the archive queue
1. In the Administration Tools, on the Daily tab, select Job Manager.
2. In the queue list, select the archive queue.
3. Click Halt Queue.
4. To confirm that you want to halt the queue, click Yes.
IMPAX 6.3 AS300 Installation Guide
71
Hide quick links:
Advertisement
Table of Contents
