Installing Impax On The Network Gateway; Prerequisites To Impax Server Installation; Installing Impax Network Gateway Packages - AGFA IMPAX AS300 Installation Manual

Installing IMPAX on the
Network Gateway
The steps required to install and initially set up IMPAX on a dedicated Network Gateway server are
somewhat different than those required when installing the Network Gateway on another server. Before
proceeding with the installation, ensure that the system has been readied as outlined in Installing
hardware and software on an AS300 server (refer to page 26).
1.

Prerequisites to IMPAX Server installation

Before installing IMPAX Server:
• Install all external software listed in Installing hardware and software on an AS300 server (refer
to page 26). If MVFSqlserver is selected in the Default Packages group and SQLServer is not on
the workstation, the installation exits and does not complete.
• Ensure that you have properly renamed the mvf and mvf archive license files. The license keys
initial name is the machine's MAC address with a .lic. extension. Rename the mvf licence file to
mvf.lic, and the mvf archive licence key to mvfarch.lic. The installation script copies them under
C:\mvf.
2.

Installing IMPAX Network Gateway packages

Use the IMPAX installer to install the necessary packages on the system.
IMPAX 6.3 AS300 Installation Guide
CAUTION!
Keep a backup copy of the license key files in a directory other than C:\mvf. If the IMPAX
software is uninstalled, all files are deleted from the C:\mvf directory.
7
62