Table of Contents
Advertisement
Alert buzzer
Free message
Inquiry change
FAN NG message
*Do not change this setting.
Enabling and configuring HSM and PACS Store and Remember archives
HSM and PACS Store and Remember archives are configured after IMPAX is installed. Continue with
the installations in this guide. Instructions for configuring HSM and PACS Store and Remember archives
are contained in the IMPAX 6.3 AS300 Configuration Guide.
11.
Synchronizing clocks on IMPAX systems
If the system time on the Application Server and the image server (ASPFTP server) differs, the
authentication tickets provided by the IMPAX Client are rejected by the ASPFTP server and image
retrieval fails. To ensure that this does not happen, configure the IMPAX systems to automatically
synchronize their system time with a common server.
Note:
Also ensure that the time zone for the computer is set correctly.
The instructions that follow use the synchronization feature built into the operating system. When
configured, Windows Time Service sets and synchronizes the system time with a standard time server.
To synchronize IMPAX with the time server if the IMPAX computer is not a member of a domain
1. Open Control Panel.
2. Select Date and Time.
3. Switch to the Internet Time tab.
4. In the Server list, type or select the time server to synchronize with.
To synchronize IMPAX with the time server if the IMPAX computer is a member of a domain
1. At a command prompt, type:
w32tm /config /syncfromflags:manual /manualpeerlist:<time server>
where <time server> is the DSN name or IP address of the time server. The <time server> can
be any Windows- or Solaris-based server.
2. To update Windows Time Service to use the new configuration, type:
w32tm /config /update
IMPAX 6.3 AS300 Installation Guide
Settings
ON
OFF
DRM-3000*
ON*
ON
OFF
DRM-7000*
37
Hide quick links:
Advertisement
Table of Contents
