Summary Of Impax As300 Server Installation Steps; General Installation Notes For Installing External Software; Setting Up An As300 Single-Host Server - AGFA IMPAX AS300 Installation Manual

Summary of IMPAX
AS300 server
installation steps
Different steps are required to install an IMPAX AS300 Server in different configurations. Details are
provided in subsequent chapters.

General installation notes for installing external software

Restart the computer whenever any installation package asks you to do so. For instance, during the
restart at the end of the Windows Server 2003 installation, the installation process registers files with
Windows and replaces some files. For your installation to work properly, make sure that if you are
asked to restart during the install, you do so before proceeding to the next step.

Setting up an AS300 single-host server

In a single-host configuration, Windows-based Database, Archive, and Network Gateway components
are all installed on one "box" or station. This is a summary of the steps to follow in setting up a single-host
station. You must perform these tasks in the order listed in the table that follows.
IMPAX 6.3 AS300 Installation Guide
Action
Install Windows Server 2003 R2 software (refer to page 26)
Configure Windows Server 2003 R2 software (refer to page 28)
Partition disks appropriately (refer to page 29) for database, volumes, logs, cache, and
ghost
Install and configure video drivers (refer to page 32)
Install SQL Server 2000 (refer to page 33)
2
20