Installing Impax 6.3 Single-Host Server Packages - AGFA IMPAX AS300 Installation Manual

2.

Installing IMPAX 6.3 single-host server packages

Use the IMPAX installer to install the necessary AS300 packages on the system. These packages are
described in AS300 installer packages reference (refer to page 17).
To install the IMPAX 6.3 packages
1. Log in as a Windows administrator.
2. Insert the IMPAX AS300 CD into the CD-ROM drive.
3. Navigate to D:\programs\mvf and double-click as300-installer.exe.
4. Type your name (minimum three characters).
This information is recorded in the installer log file.
5. In the Welcome dialog, click Next.
6. In the Select Components dialog, all default packages are selected (as shown in the figure that
follows). Clear the checkboxes of any packages that should not be installed.
7. Unless using PACS Store and Remember archiving (or not using the station for archiving at all),
select the Archive Packages label (not the Archive Packages checkbox), then select the checkbox
of archive package the server is using.
IMPAX 6.3 AS300 Installation Guide 48