AGFA IMPAX AS300 Installation Manual page 63

To install the IMPAX packages
1. Log in as a Windows administrator.
2. Insert the IMPAX AS300 CD into the CD-ROM drive.
3. Navigate to D:\programs\mvf and double-click as300-installer.exe.
4. Type your name (minimum three characters).
This information is recorded in the installer log file.
5. In the Welcome dialog, click Next.
6. In the Select Components dialog, all default packages are selected (as shown in the figure that
follows). Clear the checkboxes of any packages that should not be installed.
7. Clear the Archive Packages checkbox.
8. Select the Optional Packages label, then select the checkboxes of any optional packages that
should be installed.
9. Browse to the location of the MVF licence file and click OK.
If the mvf.lic file is not located in C:\mvf, the file is copied to that location. A dialog informs you
of the success of the copy task.
10. Browse to the location of the portable password file and click OK.
11. Type the temporary password used to create the portable password file and click OK.
The mvf.psd file is imported under C:\mvf.
12. To continue the installation, in the Summary dialog, click Next.
The files are copied.
To ensure that all services are restarted correctly, always restart the computer.
13. After all the packages have been installed, to close the installation dialog and reboot the system,
click Yes, I want to restart my computer now.
IMPAX 6.3 AS300 Installation Guide 63