Installing Adobe Reader; Obtaining Server License Keys; Obtaining The Mac Address On A Windows Station - AGFA IMPAX AS300 Installation Manual

20.

Installing Adobe Reader

The IMPAX 6.3 Installation and Configuration guides ship with the product in PDF format. To view
and print the files, install the Adobe Reader.
Note:
This installation procedure requires a direct Internet connection. If the system does not have a direct
Internet connection, contact your IT department.
To install Adobe Reader
1. Download the software from Adobe's website at
http://www.adobe.com/products/acrobat/readstep2.html.
2. Run the install executable.
3. In the Acrobat Reader Installation Wizard, select the appropriate options on each screen. After
each selection, click Next.
21.

Obtaining Server license keys

IMPAX uses software license keys that are unique to the station on which the software is installed. One
license key is required for the Network Gateway and a separate license key must be obtained for the
Archive Server (even if using PACS Store and Remember archiving). The Pegasus JPEG license is no
longer required for running Compressor, and so no longer has to be obtained.

Obtaining the MAC address on a Windows station

To obtain new license keys, if this is required, email licensekey@agfa.com. To generate the license
keys, Agfa must know the Ethernet MAC (Media Access Control) address of the server.
To obtain the MAC address on a Windows station
1. For each server, open a command prompt and type ipconfig /all.
The MAC address of the Ethernet card installed on the station is listed as the physical address.
2. Copy this address to a secure place.
Ensure that you copy down the address exactly as it appears, including leading zeroes.
3. To obtain a license key for the server, send the MAC address information to licensekey@agfa.com,
along with the type of component being installed on that server.
IMPAX 6.3 AS300 Installation Guide 46