AGFA IMPAX AS300 Installation Manual page 41

8. Accept the default port number (1521). Click Next.
9. Select Yes, perform a test. Click Next.
The first time the test runs, you see an error message. Ignore the error.
10. Click Change Login.
11. In the Username field, type mvf, and type the password for the mvf user.
12. Click OK.
The test is performed again. The connection should be successful.
13. Click Next.
14. In the Net Service Name field, ensure that MVF.world appears. Click Next.
15. At the prompt to configure another net service name, select No. Click Next.
16. In the Net Service Name Configuration Complete dialog, click Next.
17. In the Naming Methods Configuration Complete dialog, click Next.
18. To close the Net Configuration Assistant dialog, click Finish.
To configure the ODBC data source name
1. Open Control Panel.
2. Select Administrative Tools.
3. Select Data Sources (ODBC).
4. Switch to the System DSN tab.
5. Click Add.
6. In the Create New Data Source dialog, select Oracle in <Oracle instance name>.
Where <Oracle instance name> is the name typed in step 8 of the To install Oracle 10g Client
procedure.
7. Click Finish.
8. In the Data Source Name field, type MVF.
9. Type a description, if needed.
10. In the TNS Service Name field, type MVF.world.
11. In the User Name field, type mvf.
The user ID must be lowercase.
12. To save the changes and close the dialog, click OK.
13. To save the new source and exit the ODBC Data Source Administrator dialog, click OK.
14. Close the Control Panel window.
To configure the character set
1. Select Start > Run.
2. In the Open field, type regedit.
3. In the Registry Editor window, navigate to
HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE\KEY_<Oracle instance name>.
IMPAX 6.3 AS300 Installation Guide 41