AGFA IMPAX AS300 Installation Manual page 59

To install the IMPAX packages
1. Log in as a Windows administrator.
2. Insert the IMPAX AS300 CD into the CD-ROM drive.
3. Navigate to D:\programs\mvf and double-click as300-installer.exe.
4. Type your name (minimum three characters).
This information is recorded in the installer log file.
5. In the Welcome dialog, click Next.
6. In the Select Components dialog, all default packages are selected (as shown in the figure that
follows). Clear the checkboxes of any packages that should not be installed.
7. Select the Archive Packages checkbox.
8. Select the Optional Packages label, then select the checkboxes of any optional packages that
should be installed.
9. Browse to the location of the MVF licence file and click OK.
If the mvf.lic file is not located in C:\mvf, the file is copied to that location. A dialog informs you
of the success of the copy task.
10. Browse to the location of the MVF archive licence file and click OK.
If the mvfarch.lic file is not located in C:\mvf, the file is copied to that location. A dialog informs
you of the success of the copy task.
11. Browse to the location of the portable password file and click OK.
12. Type the temporary password used to create the portable password file and click OK.
IMPAX 6.3 AS300 Installation Guide
Note:
In particular, if installing Curator on the same machine as the Archive Server, select MVFCurator
now.
59