Dell Latitude D820 Technical Manual page 80

computer is running and connected to a docking device (docked).
NOTICE: To prevent damage to devices, store them in a safe, dry place when they are not
installed in the computer. Avoid pressing down on them or placing heavy objects on top of them.
1. If present, remove the device security screw from the bottom of the computer (see
the Device Security
2. If the computer is running, double-click the Safely Remove Hardware icon on the taskbar,
click the device you want to eject, and click Stop.
3. Press the device latch release.
4. Pull the device out of the media bay.
5. Push the new device into the bay until it clicks.
Hinge Cover
CAUTION: Before you begin any of the procedures in this section, follow the safety
instructions in the Product Information Guide.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by
periodically touching an unpainted metal surface (such as a connector on the back of the
computer).
NOTICE: The hinge cover is fragile and can be damaged if extreme force is used. Be careful
when removing the hinge cover.
1. Follow the procedures in
2. Turn the computer top-side up, and then open the display all the way (180 degrees) so that it
rests on your work surface.
NOTICE: To avoid damaging the hinge cover, do not lift the cover on both sides simultaneously.
3. Insert a scribe in the indent to carefully pry up the hinge cover on the right side.
Screw).
Before You Begin.
Removing