Dell Latitude D820 Technical Manual page 79

1 foam packaging
Media Bay
NOTE: If the device security screw is not present, you can remove and install devices while the
computer is running and connected to a docking device (docked).
Removing the Device Security Screw
If present, you must remove the device security screw before you remove the device:
1. Save and close any open files, exit any open programs, and shut down the computer.
2. If the computer is connected to a docking device (docked), undock it. See the documentation
that came with your docking device for instructions.
3. Close the display and turn the computer upside-down.
4. Use a #1 Phillips screwdriver to remove the device security screw from the bottom of the
computer.
1 device security screw
2 device latch release
Removing and Installing Media Bay Devices
NOTE: If the device security screw is not installed, you can remove and install devices while the
2 hard drive