3Ware 9650SE Installation Manual page 36

Chapter 3. Installing the Battery Backup Unit
b Press down gently on the top of the battery unit so that the
battery holder flexes slightly and the clip on the bottom
slips over the slot on the bottom edge of the controller.
Figure 27. Pressing down gently so that the bottom clip can
Bottom clip
If you have a 12-port or 16-port 9650SE:
a Insert the clips on the top of the battery module into the
holes on the controller.
Figure 28. Attaching the battery module to the full-height
b Press down gently on the battery module until the bottom
clip snaps into place in the lower hole.
32 3ware 9650SE Serial ATA RAID Controller Installation Guide
be inserted
controller