3Ware 9650SE Installation Manual page 26

Chapter 2. Installing Your 3ware RAID Controller
Figure 17. 12-Port 3ware 9650SE-12ML Serial ATA RAID Controller
LED indicators for individual drives
J7 is for drives 0, 1, 2, 3 (left to right)
J8 is for drives 4, 5, 6, 7 (left to right)
J9 is for drives 8, 9, 10, 11 (left to right)
Figure 18. 16-Port 3ware 9650SE-16ML Serial ATA RAID Controller
LED indicators for individual drives
J7 is for drives 0, 1, 2, 3 (left to right)
J8 is for drives 4, 5, 6, 7 (left to right)
J9 is for drives 8, 9, 10, 11 (left to right)
J1 is for drives 12, 13, 14, 15 (left to right)
22 3ware 9650SE Serial ATA RAID Controller Installation Guide
Overall LED drive status indicator is the
right-most LED header pin pair on each
LED connector (J7, J8, and J9). The
anode is the lower of the two pins and
the cathode is the upper.
Overall LED drive status indicator is the
right-most LED header pin pair on each
LED connector (J7, J8, J9, J1). The
anode is the lower of the two pins and
the cathode is the upper.