3Ware 9650SE Installation Manual page 13

Away from sources of vibration or physical shock.
Isolated from strong electromagnetic fields produced by
electrical devices.
In regions that are susceptible to electrical storms, we
recommend you plug your system into a surge suppressor and
disconnect telecommunication lines to your modem during an
electrical storm.
Provided with a properly grounded wall outlet.
Provided a product main power disconnect or sufficient space
to access the power supply cord(s), because they serve as the
product's main power disconnect.
Personal Safety When Installing the 9650SE RAID
Controller in Your Computer
Warning!
equipment.
Before installing any of the hardware in this package or
removing the protective covers of any computer equipment, turn
off power switches and disconnect power cords. Do not
reconnect the power cords until the hardware is installed and the
system cover is closed.
Protecting Equipment and Data
Heat Sink Warning.
sink shipped with the 3ware 9650SE RAID controller. Replacing
the heat sink will alter thermal characteristics and cooling
requirements and may cause the controller to fail. Replacing the
factory-installed heat sink will void the warranty.
Back up your data!
existing files on the member drives. If your drives contain
valuable data, back them up and save the data elsewhere
before attaching the drives to the controller.
www.3ware.com
High voltages may be found inside computer
Do not replace the factory-installed heat
Creating or deleting disk arrays destroys
Safety Information
9