Step 4. Connecting Drive Activity LED Indicators (Optional)
Figure 15. 4-Port 3ware 9650SE-4LPML Serial ATA RAID Controller
LED indicators for individual
drives on J7: 0, 1, 2, 3
(left to right)
Figure 16. 8-Port 3ware 9650SE-8LPML Serial ATA RAID Controller
LED indicators for individual
drives J7 is for drives 0, 1, 2, 3
(left to right) J8 is for drives 4, 5,
6, 7 (left to right)
www.3ware.com
Overall LED drive status indicator:
the last two pins of J7. The anode
is the lower of the two pins and
the cathode is the upper.
Overall LED drive status indicator is
the right-most LED header pin pair
on each LED connector (J7 and J8).
The anode is the lower of the two
pins and the cathode is the upper.
21