Adjusting The Image Quality Of The Rear Camera; Displaying Guidelines; Adjusting The Guidelines - Clarion NX603 Quick Start Manual & Installation Manual

Adjusting the image quality of
the rear camera
1
Touch the screen while the rear
camera image is displayed.
2
Display Adjustment
If five seconds elapses
without you touching the
screen, Display Adjustment will be
hidden.
3
or of item to adjust
Adjust the image quality while viewing
the video image on screen.
4
Back
This sets the newly adjusted image
setting.
Image quality adjustments can be set
for both the day and night screens.

Displaying guidelines

1
Touch the screen while the rear
camera image is displayed.
2
Guideline Display
If five seconds elapses
without you touching the
screen, Guideline Display will be
hidden.
3
Check
The guidelines are displayed.
A
C B C
A: Position about 6.6 ft (2 m) from the
rear end of the vehicle
B: Position about 20 in (50 cm) from
the rear end of the vehicle
C: Approximately vehicle width
+ 8 in (20 cm)

Adjusting the guidelines

When adjusting guidelines, marks must
be drawn on the ground. Prepare tools for
drawing lines on the ground, such as duct
tape. Also, be sure to do the adjustments to
match the car you drive.
WARNING
Before adjusting the guidelines, stop
at a safe location.
Before getting out of the vehicle and
marking the ground, be sure to turn
the engine key to the "OFF" position.
Remember that guidelines are solely
for reference. During actual driving,
be sure to check the safety of the
area around you yourself.
1
Mark straight marks on the
ground at vehicle width + about
8 in (20 cm) positions.
Approx. 8 in (20 cm)
Approx. 8 in (20 cm)
MEMO
Mark on both sides of the vehicle
using packaging or similar tape.
Make the marks slightly longer than
the length of the vehicle.
2
Drive the vehicle forward by
about 8.2 ft (2.5 m), and mark
straight lines at the rear of the
vehicle.
Rear of vehicle
3
Mark four locations on the left
and right 20 in (50 cm) and 6.6 ft
(2 m) away from the marks you
made in step 2.
6.6 ft (2 m)
20 in (50 cm)
MEMO
We recommend making an X mark
using packaging or similar tape that
is easily visible from the driver's
seat.
4
Display the guidelines P.37
5
Guideline Adjust
6
Select the four guideline points
you want to adjust.
NX603/FX503 37