4.
Once the destination is selected, a full screen map appears with the selected point in the middle. If
necessary, tap the map somewhere else to modify the destination. The Cursor (
the new location. Tap
5.
After a short summary of the route parameters, the map appears showing the entire route. The
route is automatically calculated. Tap
tap
Note!
The alternative way to search for an address is to tap the
menu. Unlike the Combined Search, this alternative search method is a structured one
where you can define the parts of the address separately.
3.1.1.4 Combined Search - Navigating to a Place of Interest
To find a Place of Interest in Combined Search, carry out the search as described earlier. Search for a
part of its name. When you get to the result screen, do as follows:
1.
Tap
at the top of the screen.
2.
The list is now filtered. What you see is the list of matching Places ordered by their distance from
your current location.
3.
(optional) Should your product contain Places from different data providers, you can further narrow
the list by showing Places from one provider only. Look for the provider logos at the top of the
screen. Tap one of them to see Places from that provider only.
4.
Scroll down the list if necessary and then select one of the Places from the list.
30 NX603 English
to confirm the destination, or tap
to select a different destination.
and start your journey.
) appears at
to modify route parameters, or
button in the Destination